Tungsten Carbide Wire Drawplate

39 holes Min. 0.26 mm, Max. 2,80 mm. The holes are made of Tungsten steel,

high hardness and good wear resistance, long life service. For gold, silver and copper wires.

The post 4720.139 – Tungsten Carbide Wire Drawplate first appeared on Hasal Cam.

Jewellery Wire Drawing Machine is for drawing gold, silver, and copper wires to thinner diameters.

This machine is made of Aluminium and Steel.

Wire is wrapped on a steel cylinder, which rotates on ball bearings to eliminate friction.

Movable oil sponge lubricates wire to reduce friction and heat.

Machine can be used by a hexagon socket handle, or cordless screw driver with socket bit.

Wire gets hard after a few drawing, you may anneal by torch or better to anneal in your enamelling furnace to have homogen annealing.

Steel wire with clamps to draw the wire for connection.

Wire diameter Min: 0,20 - Max: - 2,00 mm

Machine dimensions: 160x350x90mm (h),

The post 4720-WIRE DRAWING MACHINE first appeared on Hasal Cam.

Main purpose is producing Enamel Cloison flat wires, Cobochon bezel flat stripes and various narrow stripes.

Machine has a robust and compact construction and made of Steel and Aluminium. Dismantled easily for maintanace.

Needle bearings reduce friction and cylinders turn very smoothly under pressure, they are self lubricating and need no maintenance.

Cylinders are fine grinded and extra hard 64 Hrc.

Precise thickness adjustment mechanism with scale 0.10 mm divisions.

Machine can be use with a handle or by cordless driver with socket bit.

Maximum sheet thickness: 2.00 mm,  Minimum sheet thickness: 0.05 mm. Thickness can be determined 0.10 mm intervals byscaled disc. Machine dimensions: 130 x 90 x 150 mm(h)

Packing dimensions:  185 x 125 x 150 mm(h)

The post 4710-MINI ROLLING MILL first appeared on Hasal Cam.